Probe Temperature Sensor
AUD $3.36 - AUD $5.80
This Probe Temperature Sensor comes standard with a 15mm Stainless Steel Temperature Sensor. This sensor is a 10K Thermistor, with an industry standard Type 2 curve.Connected to the end of the Sensor is 2 UL2468 26/2CAWG 105°C Black Wires with tinned ends.
Product Highlights:
- Many ranges available. Standard range is 10k type2
- Accuracy is ±0.2C
- Temperature Range: -40℃ to125℃
- Insulated Resistance: >100MΩ,500VDC in water
- Breakdown Voltage: 1500VAC, 1min
- UL listed Cable,UL file NO.2468
Available Options:
Probe Temperature Sensor
.JPG)
Size：
Part Number Scheme：
| Weight | 0.03 kg |
|---|---|
| Temperature Type | Probe Temperature Sensor |
| Probe Length | 0.6 inch, 4 inch |
| Temperature Curve | 10K Type 2, 10K Type 3, 1K PT |
Related Products
-
RTS3 Flush Mount Hidden Room Temp
AUD $10.69 - AUD $12.67Availability: In stockOut of stock
The room temperature sensor provide precision room temperature sensing in a discreet button form factor for all popular DDC systems.
-
Boiler stack temperature sensor and thermowell, 1k Pt
AUD $35.12 - AUD $47.34Availability: In stockOut of stock
The Boiler stack temperature sensor and thermowell are designed to monitor the temperature of boiler stacks, steam lines and other applications where the temperature is above the operating range of typical HVAC thermistor type sensors. Maximum operating temperature of 300 Deg C (570 DegF).
-
Outdoor Air Temperature Sensor
AUD $10.69 - AUD $12.22Availability: In stockOut of stock
This sensor is used to measure the outside air temperature to allow the DDC system to coordinate the mechanical systems with actual building load conditions, enabling such strategies as free cooling, optimum start/stop, and supply temperature reset. The housing is made from PVC and stainless steel fittings which shield the probe from direct sunlight. There are three thermistor based models, and one RTD version to provide compatibility with the majority of DDC systems.
-
High temperature over molded floor heating sensor
AUD $8.40Availability: In stockOut of stock
High temperature over molded floor heating sensor,4.5m cable length,6.0mm diameter pipe,10k Type2 thermistor.
-
WTS Series Water Temperature Sensor
AUD $7.64 - AUD $20.61Availability: In stockOut of stock
This sensor is used to measure water temperature of heated or chilled water and other liquids in mechanical systems. The sensor is called an immersion type where the sensor is mounted in a brass or stainless steel thermowell which allows the probe to be removed from the pipe without draining the system and protects the probe.There are four thermistor based models, and one RTD version to provide compatibility with the majority of DDC systems.
-
WTS6-I: Strap-On Insert Temperature Sensor
AUD $7.64Availability: In stockOut of stock
The strap-on Insert sensor consists of a stainless steel sheath temperature sensor, thermal conducting compound, and an adjustable pipe bracket accessory. The stainless steel sheath temperature sensor is suitable for direct application to pipe surfaces for chilled or hot water measurement.
-
Bacnet Room Setpoint & Temp Display
AUD $58.03Availability: In stockOut of stock
Bacnet Room Setpoint & Temp Display can be used in environment monitoring and controlling in industrial,commercial and other buildings,Modbus RS485/Bacnet MS/TP for direct digital reading on all models.
-
WTS5: Strap-on Water Temperature Sensor
AUD $10.69 - AUD $12.22Availability: In stockOut of stock
This sensor is used to measure water temperature of heated or chilled water and other liquids found in the various mechanical systems of building. The sensor is especially intended for strapping to the outside of a pipe when there is no opportunity to install a well such as in a retrofit or additions to an existing system.The strap on probe is useful in applications such as monitoring batteries, transformers, generators, and generally any place where a complete assembly can not be mounted,Ice rink slabs and soil temperature are other applications.
-
Clip On Temperature Sensor
AUD $5.88 - AUD $8.55Availability: In stockOut of stock
We have designed this clip-on temperature sensor for use with refrigerant lines and copper tubing in hydronics applications. The sensor installs easily without drilling and reacts to temperature changes in seconds. Industry standard sensor elements are compatible with all major controls systems.
