English 
Chinese 
Sensors
HVAC and Industrial Sensors
-
1K PT Temperature Sensors
$4.50 – $9.40Availability: In stockOut of stock
The 1K Platinum temperature sensors for building automation, agricultural and light industrial duty applications.
-
Air Quality, Hum & Temp
$26.00 – $34.00Availability: In stockOut of stock
The Node style sensor is a small form factor sensor designed for environment monitoring and control in commercial and institutional buildings. The product supports both Modbus and Bacnet on the RS485port for direct digital readings over the network on all models. Also has transducer outputs configurable as either 0-10V or 4-20ma signals.
-
Bacnet Room Setpoint & Temp Display
$25.00Availability: In stockOut of stock
Bacnet Room Setpoint & Temp Display can be used in environment monitoring and controlling in industrial,commercial and other buildings,Modbus RS485/Bacnet MS/TP for direct digital reading on all models.
-
Boiler stack temperature sensor and thermowell, 1k Pt
$28.00Availability: In stockOut of stock
The Boiler stack temperature sensor and thermowell are designed to monitor the temperature of boiler stacks, steam lines and other applications where the temperature is above the operating range of typical HVAC thermistor type sensors. Maximum operating temperature of 300 Deg C (570 DegF).
-
-
Humidity and Temp Transmitters
$24.00 – $54.00Availability: In stockOut of stock
Humidity & Temp transmitters are designed for environmental monitoring and controlling in industrial, commercial and other buildings.
-
Overmolded temp sensor
$5.00Availability: In stockOut of stock
The Overmolded temp sensor is a 10K type2 thermistor sensor with -50~105 DegC cable, 4.5m in length,two black wires with soldered ends connected to the end.
-
PM2.5/10 Particle Counter
$115.00 – $144.00Availability: In stockOut of stock
The PM2.5/10 Particle Counter is designed for environmental monitoring in industrial, commercial and institutional buildings,which provides accurate readings of particle counts in two important sizes, 2.5μm and 10μm.
-
Temperature and Humidity Transducer with Bacnet and Modbus RS485
$25.00 – $30.00Availability: In stockOut of stock
-
Water Flow Switch
$24.00Availability: In stockOut of stock
Water Flow Switch, Stainless Steel Paddles, brass fittings, SPDT switch, liquid, water, ethylene glycol solutions.The TF50-P Flow Switch is used to prove flow in liquid lines using water, ethylene glycol solutions, or other liquids compatible with brass and phosphor bronze parts. The SPDT contact switch is activated by the flow of liquid through the pipes. The set point is adjustable.
-
CO2 Sensor
$64.00 – $130.00Availability: In stockOut of stock
The CO2 sensor with Humidity & Temp transmitters are designed for environmental monitoring and controlling in industrial, commercial and other buildings. These transmitters can be used for indoor C02, temperature and humidity monitoring. The modbus interface provides easy setup and integration into large systems.Supports Modbus RTU over both the Ethernet port and the RS485 port,supports Bacnet over both the Ethernet port (IP) and the RS485 port (MSTP).
-
Air Flow Switch
$27.00Availability: In stockOut of stock
The duct air flow switch provides feedback of air flow in HVAC duct work. It can be connected directly to the control system as a feedback point or can be directly interlocked to prevent operation of heating and cooling equipment when there is no air flow. Stainless steel paddle resists corrosion. Adjustable spring tension screw allows setting the air flow trip point. The paddle can be trimmed down for higher flow applications. The cable enters through the water tight gland, or the gland can be removed and replaced with an EMT or flex connector for wiring with EMT or metal flex.
