English 
简体中文 
High temperature probe for Floor Heating & Solar applications
$6.00 - $10.30
This temperature probe is suitable for a variety or high temperature applications such as floor heating, solar heating systems and domestic hot water heaters to name a few. The sensor element is housed in a stainless steel probe which is 6mm diameter x 50mm [2in] long. The cable is 4.5 meter long and is a high temperature material that is tough and highly durable.The probe is available with custom thermistors and Pt elements, nearly all the popular ranges are available with very small minimum order quantity.
Product Highlights:
- 10K type 2 Accuracy: +-0.2C
- Many curves available, same price
- Temperature sensor Range: -40~125℃
- The operating temperature range of the wire is：-40~80℃
- Highly durable cable, 4.5 meters long
- UL listed cable, UL file NO.E352430
- 2 Conductors,20 gauge
- Rated to 105°C /221°F continuous 120°C/248°F intermittent
- Stranded copper conductor clad with PVC
Available Options:
Dimension:
PRB-50-45-7
PRB-50-100-7
Part Number Scheme:
| Weight | 0.16 kg |
|---|---|
| Temperature Type | Floor Heating / Solar heating temperature probe |
| Probe Length | 20mm, 50mm |
| Temperature Curve | 10K Type 2, 10K Type 3, 1K PT |
You may also like…
-
WTS6-I: Strap-On Insert Temperature Sensor
$5.00Availability: In stockOut of stock
The strap-on Insert sensor consists of a stainless steel sheath temperature sensor, thermal conducting compound, and an adjustable pipe bracket accessory. The stainless steel sheath temperature sensor is suitable for direct application to pipe surfaces for chilled or hot water measurement.
-
Probe Temperature Sensor
$2.20 - $3.80Availability: In stockOut of stock
This Probe Temperature Sensor comes standard with a 15mm Stainless Steel Temperature Sensor. This sensor is a 10K Thermistor, with an industry standard Type 2 curve.Connected to the end of the Sensor is 2 UL2468 26/2CAWG 105°C Black Wires with tinned ends.
-
WTS6-E: Strap-On External Temperature Sensor
$5.00 - $6.00Availability: In stockOut of stock
The strap-on temperature sensor is used for sensing the temperature of pipework in heating, ventilation and air conditioning systems.
Related Products
-
Outdoor Air Temperature Sensor, Overmolded
$5.00 - $6.00Availability: In stockOut of stock
Accurate Outdoor Air Temperature Sensor for HVAC systems with a sealed stainless steel probe, PVC radiation shield, 2m cable, and quick-response thermal grease.
-
Duct Temperature Sensor – Flange Mount
$5.00 - $8.00Availability: In stockOut of stock
This sensor is used to measure the supply and return temperature in HVAC system. The flange mount design makes it easy to install the sensor in tight quarters. There are several sensor elements to choose from which guarantee compatibility with all popular DDC systems. The probe in the photo is our standard model which is always in stock, it has a 8″ probe and a 120″ cable, and employs either a precision thermistor or platinum film sensor, so field calibration is not required. The 10ft(3m) cable is “Plenum Rated”.
-
Temperature Transducer with Bacnet and Modbus RS485
$19.00 - $35.00Availability: In stockOut of stock
Duct mount temperature only transducer, Bacnet/Modbus over RS485, 0-10v 4-20ma output signal
-
Averaging Temperature Sensor
$27.00 - $60.00Availability: In stockOut of stock
The sensor measures temperature in stratified air such as the mixing sections of air handlers. The sensor has a standard 10k type 2 temperature-resistance curve compatible with all major control systems.
-
BACnet Room Setpoint & Temperature Display for HVAC & Building Automation
$38.00Availability: In stockOut of stock
The BACnet Room Setpoint & Temperature Display is developed for use in industrial, commercial, and smart building environments where reliable environmental monitoring is required. Real-time temperature values and room setpoints are displayed through BACnet MS/TP or Modbus RS485 communication protocols.
Integration with building automation systems (BAS) and HVAC controllers is enabled through standardized communication support.
-
Boiler stack temperature sensor and thermowell, 1k Pt
$23.00 - $31.00Availability: In stockOut of stock
The Boiler stack temperature sensor and thermowell are designed to monitor the temperature of boiler stacks, steam lines and other applications where the temperature is above the operating range of typical HVAC thermistor type sensors. Maximum operating temperature of 300 Deg C (570 DegF).
-
RTS Wall and Bead Sensors
$1.00 - $3.50Availability: In stockOut of stock
The room sensors are used to provide reliable, accurate temperature readings in surface-mount room environments, Energy Management Control Systems, compatible with all the leading control systems.They feature a standard plastic ventilated enclosure.
-
Duct Temperature Sensor
$6.70 - $12.50Availability: In stockOut of stock
The duct sensor is used to measure the supply and return air temperature in HVAC system. There are several sensor elements to choose from which guarantee compatibility with all popular DDC systems. There is a precision thermistor. The probes are epoxy sealed to prevent moisture from migrating into the probe. Field calibration is not generally required. The standard probe length is 12 inch. Custom probe lengths, wire types and sensor elements are available for large OEM projects. Ask about our plastics & metal manufacturing capabilities for custom housings as well.
-
Thermowells
$5.50 - $8.50Availability: In stockOut of stock
These thermowells are designed for mounting temperature sensors in pipes and tanks.The thermowells are designed to handle this stress while providing good thermal contact with the fluid.They also provide isolation, if the sensor needs to be serviced the system can remain in operation without having to drain the lines. The thermowells are machined from a single piece of bar stock, there are no welds as found on competing products.
