Outdoor Air Temperature Sensor, Overmolded
RMB ¥36.43 - RMB ¥43.72
The temperature sensor is designed to measure outdoor air temperature in typical HVAC applications. Mounting is quick and easy using two screws and no electrical box. The thermistor is a well sealed stainless steel probe which is then inserted into a hard rubber PVC radiation shield. The cable is two meters long which allows terminating inside the building in an electrical enclosure or with flying leads. The cable can exit directly behind the probe and into the building through a hole, or it can exit vertically and run down the wall. A foam backing seals the hole in the wall if there is one and also serves to thermally insulate the probe from the wall. The probe is filled with thermal grease for quick response.
Product Highlights:
- General purpose outdoor temperature sensor
- Easy installation – two screws secure the sensor to the wall or an electrical box
- Fully potted stainless steel probe protects sensing element and provides fast, accurate temperature sensing
- Cost efficient design
- Sturdy construction – housing is made from a PVC + rubber blend which resists shock even in cold weather
- UV inhibitors resist degradation of the plastic even after many years in direct sunlight
- Operating temperature Range: -40°C to 60°C
Available Options:
Outdoor Air Temperature Sensor
Dimension：
unit：mm
Part Number Scheme:
| Weight | 0.08 kg |
|---|---|
| Temperature Curve | 10K Type 2, 10K Type 3, 1K PT, 3K |
Related Products
-
WTS6-E: Strap-On External Temperature Sensor
RMB ¥36.43 - RMB ¥43.72Availability: In stockOut of stock
The strap-on temperature sensor is used for sensing the temperature of pipework in heating, ventilation and air conditioning systems.
-
Bacnet Room Setpoint & Temp Display
RMB ¥276.87Availability: In stockOut of stock
Bacnet Room Setpoint & Temp Display can be used in environment monitoring and controlling in industrial,commercial and other buildings,Modbus RS485/Bacnet MS/TP for direct digital reading on all models.
-
WTS6-I: Strap-On Insert Temperature Sensor
RMB ¥36.43Availability: In stockOut of stock
The strap-on Insert sensor consists of a stainless steel sheath temperature sensor, thermal conducting compound, and an adjustable pipe bracket accessory. The stainless steel sheath temperature sensor is suitable for direct application to pipe surfaces for chilled or hot water measurement.
-
High temperature over molded floor heating sensor
RMB ¥40.07Availability: In stockOut of stock
High temperature over molded floor heating sensor,4.5m cable length,6.0mm diameter pipe,10k Type2 thermistor.
-
Probe Temperature Sensor
RMB ¥16.03 - RMB ¥27.69Availability: In stockOut of stock
This Probe Temperature Sensor comes standard with a 15mm Stainless Steel Temperature Sensor. This sensor is a 10K Thermistor, with an industry standard Type 2 curve.Connected to the end of the Sensor is 2 UL2468 26/2CAWG 105°C Black Wires with tinned ends.
-
Averaging Temperature Sensor
RMB ¥182.15 - RMB ¥393.44Availability: In stockOut of stock
The sensor measures temperature in stratified air such as the mixing sections of air handlers. The sensor has a standard 10k type 2 temperature-resistance curve compatible with all major control systems.
-
Thermowells
RMB ¥40.07 - RMB ¥61.93Availability: In stockOut of stock
These thermowells are designed for mounting temperature sensors in pipes and tanks.The thermowells are designed to handle this stress while providing good thermal contact with the fluid.They also provide isolation, if the sensor needs to be serviced the system can remain in operation without having to drain the lines. The thermowells are machined from a single piece of bar stock, there are no welds as found on competing products.
-
WTS5: Strap-on Water Temperature Sensor
RMB ¥51.00 - RMB ¥58.29Availability: In stockOut of stock
This sensor is used to measure water temperature of heated or chilled water and other liquids found in the various mechanical systems of building. The sensor is especially intended for strapping to the outside of a pipe when there is no opportunity to install a well such as in a retrofit or additions to an existing system.The strap on probe is useful in applications such as monitoring batteries, transformers, generators, and generally any place where a complete assembly can not be mounted,Ice rink slabs and soil temperature are other applications.
-
Tamper Proof room temperature sensor
RMB ¥36.43 - RMB ¥43.72Availability: In stockOut of stock
The tamper proof room temperature sensor with Torx security screws designed for use with building automation systems in commercial buildings, hospitals, museums or other facilities requiring accurate measurement of room temperature. This sensor can be directly mounted to drywall or an 11-10 electrical handy box.
