Terminal Shorting Bar
$0.55
Terminal shorting bar,10 pin.Use these strips to run a common conductor through multiple terminals on any of the Temco T3 series controllers and I/O modules. The outer bar is covered in high temperature ABS. They’re available in 10 pin only version for now, you can cut them down for shorter runs or gang them up for longer runs.
Product Highlights:
- Specs: 10 pin shorting strip
- Spacing: 3.1mm
- Material: Galvanized steel, 0.8mm thickness,2.1mm width
- Insulation: UL listed ABS
- Maximum Current: 10 amps
- Maximum Voltage: 110VAC
Related Products
-
RS485 Lightning Protector
$10.00Availability: In stockOut of stock
RS485 Lightning Protector is used for lightning protection of data communication system.
-
Momentary Push Button
$3.10 - $4.00Availability: In stockOut of stock
HPB5 series are suitable to industrial control circuit with AC 50Hz or 60HZ, 0~380V rated voltage and 0~220V D C operating voltage,used for the control of magnetic starter, contactor, relay and other electric circuit.
-
Power Adapter – PA-12V
$5.00Availability: In stockOut of stock
The product is AC to DC switching power transfer device,of which the black pluggable connector fits onto most Temco products, or can be taken off to connect to your own devices.
-
Flashing Strobe Annunciator
$20.30Availability: In stockOut of stock
The strobe sounder is a handy way to announce alarms in your systems with a 100dB horn and bright flashing LED. The flame retardant ABS enclosure is IP65 rated for most indoor applications. Eight selectable tones and a volume control on the rear PCB allow you to tailor the unit for each project.
-
Connectors
$0.12 - $1.80Availability: In stockOut of stock
The connectors,also called plug-in terminal blocks, provide the wire size from 0.08mm2 to 16mm2. It is available with different pitches from 2.5mm to 10.16mm.You can choose insert direction, contact direction, plug-in direction according to requests.
-
Plastic Switch Box
$7.50 – $8.25Availability: In stockOut of stock
The Switch BOX series sealed box is widely used in industries such as machinery and machine tool, electric equipment, power, communication, automation, etc., as well as in marine, metallurgy, chemical, aerospace, rail transportation, sewage treatment, architecture and so on. Depending on the requirements, it can be used as sealed box, instrument case, field control cabinet, or illumination box. It also can be used as terminal box or button box.
-
Split Core Current Sensor with 5VDC output
$9.50Availability: In stockOut of stock
These split core current sensors are cost-effective tools for monitoring single phase AC loads such as fans, pumps, and compressors. The split core design and the self powered electronics make for very simple installation. They are suitable for general monitoring and alarming of HVAC systems for conditions such as a slipped belt or an impending bearing failure.
