Temperature Transducer with Bacnet and Modbus

Temperature Transducer with Bacnet and Modbus RS485

AUD $29.01 - AUD $53.45

Duct mount temperature only transducer, Bacnet/Modbus over RS485, 0-10v 4-20ma output signal

Product Highlights:

-High precision sensor accurate to 2% humidity over the entire temperature range.
-Duct mount style is suitable for typical HVAC and agricultural applications
-Field selectable span for the temperature range
-100% field changeable Temp/Hum module, no tools or calibration needed.
-Jumper select the output signal: 4~20mA or 0-10V
-BACnet MS/TP and Modbus RTU protocols over RS485.
-Enthalpy and dew point are available over the RS485 link

Brochure PDF Certifications BacnetPICStatement

Available Options:

Duct temperature transmitter is applicable to all kinds of building automation, environment monitoring, and HVAC systems. Its simple design, direct connection points, and easy installation make it easy to use in various setups.

Therefore, the product uses a powerful built-in processor and accurate sensors to meet the needs of stable and correct temperature measurement in different environments.

ChatGPT said:

This Temperature Transducer with Bacnet and Modbus RS485 offers multiple output options, including current, voltage, and 485 signals, using the RS485 serial port with Modbus communication protocol. As a result, it is widely used in HVAC, electrical plants, dynamic and general environmental monitoring, agricultural and weather monitoring, biological lab environments, airports, subway stations, hotels, museums, stadiums, and more.

Dimension

Dimension of Temperature Transducer with Bacnet and Modbus

Wiring Diagram

Wiring Diagram of Temperature Transducer with Bacnet and Modbus

Part Num Scheme

Part Number Scheme of Temperature Transducer with Bacnet and Modbus

In conclusion, this duct temperature sensor is a simple, reliable, and highly useful device for many types of environments. Its easy installation, direct connection points, and strong performance make it ideal for both small and large systems. As a result, with accurate sensors and a strong processor, it ensures precise and stable temperature readings at all times.

ChatGPT said:
ChatGPT said:

Because it supports multiple output options, including current, voltage, and Modbus communication through an RS485 port, It fits easily into different building control and monitoring setups. Whether used in HVAC systems, environmental monitoring, electrical plants, airports, hotels, or agricultural spaces, it consistently delivers reliable results.

Overall, it is a useful and reliable choice for anyone who needs accurate temperature monitoring across various applications.
Weight 0.1 kg
Module type

Temperature, Water Temperature Sensor
Probe Length

2 inch, 3 inch, 4 inch, 6 inch

Related Products

  • Duct Averaging Temperature Sensor
    Select options
    Averaging Temperature Sensor
    AUD $38.18 - AUD $82.46

    Availability: In stockOut of stock

    The sensor measures temperature in stratified air such as the mixing sections of air handlers. The sensor has a standard 10k type 2 temperature-resistance curve compatible with all major control systems.

  • Select options
    RTS Wall and Bead Sensors
    AUD $1.53 - AUD $5.34

    Availability: In stockOut of stock

    The room sensors are used to provide reliable, accurate temperature readings in surface-mount room environments, Energy Management Control Systems, compatible with all the leading control systems.They feature a standard plastic ventilated enclosure.

  • Select options
    RTS3 Flush Mount Hidden Room Temp
    AUD $10.69 - AUD $12.67

    Availability: In stockOut of stock

    The room temperature sensor provide precision room temperature sensing in a discreet button form factor for all popular DDC systems.

  • Add to cart
    High temperature over molded floor heating sensor
    AUD $8.40

    Availability: In stockOut of stock

    High temperature over molded floor heating sensor,4.5m cable length,6.0mm diameter pipe,10k Type2 thermistor.

  • Select options
    Boiler stack temperature sensor and thermowell, 1k Pt
    AUD $35.12 - AUD $47.34

    Availability: In stockOut of stock

    The Boiler stack temperature sensor and thermowell are designed to monitor the temperature of boiler stacks, steam lines and other applications where the temperature is above the operating range of typical HVAC thermistor type sensors. Maximum operating temperature of 300 Deg C (570 DegF).

  • Add to cart
    Bacnet Room Setpoint & Temp Display
    AUD $58.03

    Availability: In stockOut of stock

    Bacnet Room Setpoint & Temp Display can be used in environment monitoring and controlling in industrial,commercial and other buildings,Modbus RS485/Bacnet MS/TP for direct digital reading on all models.

  • Select options
    Outdoor Air Temperature Sensor
    AUD $10.69 - AUD $12.22

    Availability: In stockOut of stock

    This sensor is used to measure the outside air temperature to allow the DDC system to coordinate the mechanical systems with actual building load conditions, enabling such strategies as free cooling, optimum start/stop, and supply temperature reset. The housing is made from PVC and stainless steel fittings which shield the probe from direct sunlight. There are three thermistor based models, and one RTD version to provide compatibility with the majority of DDC systems.

  • Select options
    WTS6-I: Strap-On Insert Temperature Sensor
    AUD $7.64

    Availability: In stockOut of stock

    The strap-on Insert sensor consists of a stainless steel sheath temperature sensor, thermal conducting compound, and an adjustable pipe bracket accessory. The stainless steel sheath temperature sensor is suitable for direct application to pipe surfaces for chilled or hot water measurement.

  • Select options
    Thermowells
    AUD $8.40 - AUD $12.98

    Availability: In stockOut of stock

    These thermowells are designed for mounting temperature sensors in pipes and tanks.The thermowells are designed to handle this stress while providing good thermal contact with the fluid.They also provide isolation, if the sensor needs to be serviced the system can remain in operation without having to drain the lines. The thermowells are machined from a single piece of bar stock, there are no welds as found on competing products.

Bravo Controls
Address:
4416 South Parkside Court Spokane, WA, Washington, US 99223
Phone:
(509) 316-6652
Email:
Scroll