RS485 Lightning Protector
$10.00
RS485 Lightning Protector is used for lightning protection of data communication system.
Product Highlights:
- Large current handling capacity
- High speed response
- Low insertion loss
Specifications:
RS485 Lightning Protector is used for lightning protection of data communication system,which can protect the four signal lines or two twisted pair line information, to provide high energy and low energy level to protect the coarse fine for the protection of the data line. It also provides fine differential mode protection and ground to common mode protection for 1, 2 and 3, 4 lines,and thus effectively absorb and transfer the energy impact caused by lightning and surge, and introduce the energy into the earth through the grounding cable, and ultimately protect the sensitive electronic equipment from being infringed. It is used for all RS485 data or composite video signal transmission system over-voltage protection
Wiring Connection：
Dimension:
| Weight | 0.08 kg |
|---|
Related Products
-
Split Core Current Sensor with 5VDC output
$9.50Availability: In stockOut of stock
These split core current sensors are cost-effective tools for monitoring single phase AC loads such as fans, pumps, and compressors. The split core design and the self powered electronics make for very simple installation. They are suitable for general monitoring and alarming of HVAC systems for conditions such as a slipped belt or an impending bearing failure.
-
Plastic Switch Box
$7.50 – $8.25Availability: In stockOut of stock
The Switch BOX series sealed box is widely used in industries such as machinery and machine tool, electric equipment, power, communication, automation, etc., as well as in marine, metallurgy, chemical, aerospace, rail transportation, sewage treatment, architecture and so on. Depending on the requirements, it can be used as sealed box, instrument case, field control cabinet, or illumination box. It also can be used as terminal box or button box.
-
Momentary Push Button
$3.10 - $4.00Availability: In stockOut of stock
HPB5 series are suitable to industrial control circuit with AC 50Hz or 60HZ, 0~380V rated voltage and 0~220V D C operating voltage,used for the control of magnetic starter, contactor, relay and other electric circuit.
-
Power Adapter – PA-12V
$5.00Availability: In stockOut of stock
The product is AC to DC switching power transfer device,of which the black pluggable connector fits onto most Temco products, or can be taken off to connect to your own devices.
-
Flashing Strobe Annunciator
$20.30Availability: In stockOut of stock
The strobe sounder is a handy way to announce alarms in your systems with a 100dB horn and bright flashing LED. The flame retardant ABS enclosure is IP65 rated for most indoor applications. Eight selectable tones and a volume control on the rear PCB allow you to tailor the unit for each project.
-
Terminal Shorting Bar
$0.55Availability: In stockOut of stock
Terminal shorting bar,10 pin.Use these strips to run a common conductor through multiple terminals on any of the Temco T3 series controllers and I/O modules. The outer bar is covered in high temperature ABS. They’re available in 10 pin only version for now, you can cut them down for shorter runs or gang them up for longer runs.
-
Connectors
$0.12 - $1.80Availability: In stockOut of stock
The connectors,also called plug-in terminal blocks, provide the wire size from 0.08mm2 to 16mm2. It is available with different pitches from 2.5mm to 10.16mm.You can choose insert direction, contact direction, plug-in direction according to requests.
