Shop
-
RTS Wall and Bead Sensors
$1.00 - $3.50Availability: In stockOut of stock
The room sensors are used to provide reliable, accurate temperature readings in surface-mount room environments, Energy Management Control Systems, compatible with all the leading control systems.They feature a standard plastic ventilated enclosure.
-
Tamper Proof room temperature sensor
$5.00 - $6.00Availability: In stockOut of stock
The tamper proof room temperature sensor with Torx security screws designed for use with building automation systems in commercial buildings, hospitals, museums or other facilities requiring accurate measurement of room temperature. This sensor can be directly mounted to drywall or an 11-10 electrical handy box.
-
T3 Series Modbus I/O Modules(End of Life)
$117.00Availability: In stockOut of stock
The T3 Series Modules are general purpose input/output modules for building integrators. Available in several input/output configurations, the T3 Series Module provides convenient termination for field devices and interfacing to HVAC, lighting, temperature sensors, and other typical building automation applications. Each of the Universal inputs can be configured, via jumper, for either 0-5V or 0-20mA signals. The outputs are available in dry contacts 1amp/output, 0-10V analog, and PNP sinking. The modules are slave devices that can be easily controlled via the RS485 serial interface using the industry standard Modbus RTU Protocol.
-
Pressure Sensor
$98.00 - $98.00Availability: In stockOut of stock
The Pressure Monitor is used to measure differential pressure in the range of +/-1″ wc full scale, +/-8″ wc, 0 ~100 PSI,0~250 PSI.It combines precision, high sensitivity silicon sensing capabilities and the latest ASIC technology to substantially reduce offset errors due to changes in temperature, stability to warm up, long term instability and position sensitivity. BACnet MS/TP and Modbus RTU protocols over RS485,with an ethernet port.
-
Outdoor Air Temperature Sensor
$7.00 - $8.00Availability: In stockOut of stock
This sensor is used to measure the outside air temperature to allow the DDC system to coordinate the mechanical systems with actual building load conditions, enabling such strategies as free cooling, optimum start/stop, and supply temperature reset. The housing is made from PVC and stainless steel fittings which shield the probe from direct sunlight. There are three thermistor based models, and one RTD version to provide compatibility with the majority of DDC systems.
-
Pluggable Power Relay
$4.00Availability: In stockOut of stock
The MY2N Relay is a general purpose plug in relay with a LED for power switching applications,built-in diode and surge suppression, test push buttons and more.MY2 = 2-Pole; MY4 = 4-Pole; N = LED; Z = Bifurcated; I = Push-to-Test.
-
Connectors
$0.12 - $1.80Availability: In stockOut of stock
The connectors,also called plug-in terminal blocks, provide the wire size from 0.08mm2 to 16mm2. It is available with different pitches from 2.5mm to 10.16mm.You can choose insert direction, contact direction, plug-in direction according to requests.
-
Floor Heating Manifold & Electro-thermal Actuator
$9.80 - $348.00Availability: In stockOut of stock
The manifold is designed for use in floor heating systems to regulate heat. It controls flow and return,with the option of connecting up to twelve floor heating circuits.The electro-thermal actuator is designed to control the flow of a hot water pipe to control indoor temperature.
-
Duct Temperature Sensor – Flange Mount
$5.00 - $8.70Availability: In stockOut of stock
This sensor is used to measure the supply and return temperature in HVAC system. The flange mount design makes it easy to install the sensor in tight quarters. There are several sensor elements to choose from which guarantee compatibility with all popular DDC systems. The probe in the photo is our standard model which is always in stock, it has a 8″ probe and a 120″ cable, and employs either a precision thermistor or platinum film sensor, so field calibration is not required. The 10ft(3m) cable is “Plenum Rated”.
-
Damper Motor
$30.00 - $76.30Availability: In stockOut of stock
The Actuator is intended for ON-OFF and floating point controls in HVAC systems. It can easily mount on a 1/2″ round or square shaft with solid screw sets. Angle of rotation is mechanically limited to 90 degree. When the actuator reaches its maximum position, the device will automatically stop. An override lever is provided on the side to manually disengage the gear. Two mechanical stops are provided for extra adjustments.
-
Dimmable Ballasts
$25.00 – $42.00Availability: In stockOut of stock
The dimmable ballasts provide a continuous and individual control of lighting sets,develop a standard for lighting control, which creates more convenience and flexibility for lighting systems while reducing system costs.
-
Water Meter
$51.00 - $98.50Availability: In stockOut of stock
FM15-25 Series Rotatory Wing Dry Transmitting Water Flow Meters are used for measuring the volume of cold/hot potable water passing through the pipeline and remotely transmitting the signal of the water volume to remote monitoring equipment
