Boiler stack temperature sensor and thermowell, 1k Pt
AUD $35.33 - AUD $47.62
The Boiler stack temperature sensor and thermowell are designed to monitor the temperature of boiler stacks, steam lines and other applications where the temperature is above the operating range of typical HVAC thermistor type sensors. Maximum operating temperature of 300 Deg C (570 DegF).
Product Highlights:
- All stainless steel probe, spun metal with no weld
- High temperature span,-200 °C ~300 °C;
- Fast response time;
- Long-Term Stability
- Industrial duty SS flanged thermowell.
- Probe is removable while in service.
Available Options:
The 1k Pt Platinum thermistor sensor is embedded in a 6mm stainless steel probe and stainless steel thermowell for mounting on boiler stacks. The sensor can be direct wired into any controller which accepts 1k Pt sensor signals or use the optional RTD2 Transmitter to convert the signal into a 4-20ma signal.
Dimension：
Part Number Scheme：
| Weight | N/A |
|---|---|
| Module type | BTS-MO-12, BTS-12, RTD2 |
Related Products
-
RTS Wall and Bead Sensors
AUD $1.54 - AUD $5.38Availability: In stockOut of stock
The room sensors are used to provide reliable, accurate temperature readings in surface-mount room environments, Energy Management Control Systems, compatible with all the leading control systems.They feature a standard plastic ventilated enclosure.
-
WTS5: Strap-on Water Temperature Sensor
AUD $10.75 - AUD $12.29Availability: In stockOut of stock
This sensor is used to measure water temperature of heated or chilled water and other liquids found in the various mechanical systems of building. The sensor is especially intended for strapping to the outside of a pipe when there is no opportunity to install a well such as in a retrofit or additions to an existing system.The strap on probe is useful in applications such as monitoring batteries, transformers, generators, and generally any place where a complete assembly can not be mounted,Ice rink slabs and soil temperature are other applications.
-
Outdoor Air Temperature Sensor, Overmolded
AUD $7.68 - AUD $9.22Availability: In stockOut of stock
The temperature sensor is designed to measure outdoor air temperature in typical HVAC applications. Mounting is quick and easy using two screws and no electrical box. The thermistor is a well sealed stainless steel probe which is then inserted into a hard rubber PVC radiation shield. The cable is two meters long which allows terminating inside the building in an electrical enclosure or with flying leads. The cable can exit directly behind the probe and into the building through a hole, or it can exit vertically and run down the wall. A foam backing seals the hole in the wall if there is one and also serves to thermally insulate the probe from the wall. The probe is filled with thermal grease for quick response.
-
Bacnet Room Setpoint & Temp Display
AUD $58.37Availability: In stockOut of stock
Bacnet Room Setpoint & Temp Display can be used in environment monitoring and controlling in industrial,commercial and other buildings,Modbus RS485/Bacnet MS/TP for direct digital reading on all models.
-
Tamper Proof room temperature sensor
AUD $7.68 - AUD $9.22Availability: In stockOut of stock
The tamper proof room temperature sensor with Torx security screws designed for use with building automation systems in commercial buildings, hospitals, museums or other facilities requiring accurate measurement of room temperature. This sensor can be directly mounted to drywall or an 11-10 electrical handy box.
-
WTS Series Water Temperature Sensor
AUD $7.68 - AUD $20.74Availability: In stockOut of stock
This sensor is used to measure water temperature of heated or chilled water and other liquids in mechanical systems. The sensor is called an immersion type where the sensor is mounted in a brass or stainless steel thermowell which allows the probe to be removed from the pipe without draining the system and protects the probe.There are four thermistor based models, and one RTD version to provide compatibility with the majority of DDC systems.
-
Duct Temperature Sensor – Flange Mount
AUD $7.68 - AUD $12.29Availability: In stockOut of stock
This sensor is used to measure the supply and return temperature in HVAC system. The flange mount design makes it easy to install the sensor in tight quarters. There are several sensor elements to choose from which guarantee compatibility with all popular DDC systems. The probe in the photo is our standard model which is always in stock, it has a 8″ probe and a 120″ cable, and employs either a precision thermistor or platinum film sensor, so field calibration is not required. The 10ft(3m) cable is “Plenum Rated”.
-
WTS6-E: Strap-On External Temperature Sensor
AUD $7.68 - AUD $9.22Availability: In stockOut of stock
The strap-on temperature sensor is used for sensing the temperature of pipework in heating, ventilation and air conditioning systems.
-
Probe Temperature Sensor
AUD $3.38 - AUD $5.84Availability: In stockOut of stock
This Probe Temperature Sensor comes standard with a 15mm Stainless Steel Temperature Sensor. This sensor is a 10K Thermistor, with an industry standard Type 2 curve.Connected to the end of the Sensor is 2 UL2468 26/2CAWG 105°C Black Wires with tinned ends.
