English 
Chinese 
BACnet Room Setpoint & Temperature Display for HVAC & Building Automation
CAD $53.24
The BACnet Room Setpoint & Temperature Display is developed for use in industrial, commercial, and smart building environments where reliable environmental monitoring is required. Real-time temperature values and room setpoints are displayed through BACnet MS/TP or Modbus RS485 communication protocols.
Integration with building automation systems (BAS) and HVAC controllers is enabled through standardized communication support.
Product Highlights:
-
Dual communication support is provided via BACnet MS/TP and Modbus RS485, allowing flexible integration with HVAC and building management systems.
-
Output signals and RS485 communication lines are hardened against overvoltage and power supply cross-over conditions for improved operational safety.
-
Temperature values are displayed in either degrees Fahrenheit or Celsius, with configuration performed through BACnet connection.
-
A bitmap LCD display is utilized, allowing temperature readings, network connectivity status, and room setpoint information to be shown clearly.
-
Room setpoint values can be displayed, enabling the device to be used as a dedicated room temperature and setpoint display.
Related Products
-
Temperature Transducer with Bacnet and Modbus RS485
CAD $26.62 - $49.04Availability: In stockOut of stock
Duct mount temperature only transducer, Bacnet/Modbus over RS485, 0-10v 4-20ma output signal
-
Boiler stack temperature sensor and thermowell, 1k Pt
CAD $32.22 - $43.43Availability: In stockOut of stock
The Boiler stack temperature sensor and thermowell are designed to monitor the temperature of boiler stacks, steam lines and other applications where the temperature is above the operating range of typical HVAC thermistor type sensors. Maximum operating temperature of 300 Deg C (570 DegF).
-
Duct Temperature Sensor – Flange Mount
CAD $7.01 - $11.21Availability: In stockOut of stock
This sensor is used to measure the supply and return temperature in HVAC system. The flange mount design makes it easy to install the sensor in tight quarters. There are several sensor elements to choose from which guarantee compatibility with all popular DDC systems. The probe in the photo is our standard model which is always in stock, it has a 8″ probe and a 120″ cable, and employs either a precision thermistor or platinum film sensor, so field calibration is not required. The 10ft(3m) cable is “Plenum Rated”.
-
Outdoor Air Temperature Sensor
CAD $9.81 - $11.21Availability: In stockOut of stock
This sensor is used to measure the outside air temperature to allow the DDC system to coordinate the mechanical systems with actual building load conditions, enabling such strategies as free cooling, optimum start/stop, and supply temperature reset. The housing is made from PVC and stainless steel fittings which shield the probe from direct sunlight. There are three thermistor based models, and one RTD version to provide compatibility with the majority of DDC systems.
-
High temperature over molded floor heating sensor
CAD $7.71Availability: In stockOut of stock
The Over Molded Floor Heating Sensor delivers precise temperature monitoring, high durability, and reliable performance for residential and industrial floors
-
Platinum Temperature Sensor
CAD $35.03 - $42.03Availability: In stockOut of stock
This Probe Temperature Sensor is a 1K Platinum coming standard with an 8″ length Stainless Steel Temperature Sensor.
-
WTS6-E: Strap-On External Temperature Sensor
CAD $7.01 - $8.41Availability: In stockOut of stock
The strap-on temperature sensor is used for sensing the temperature of pipework in heating, ventilation and air conditioning systems.
-
Outdoor Air Temperature Sensor, Overmolded
CAD $7.01 - $8.41Availability: In stockOut of stock
Accurate Outdoor Air Temperature Sensor for HVAC systems with a sealed stainless steel probe, PVC radiation shield, 2m cable, and quick-response thermal grease.
-
WTS Series Water Temperature Sensor
CAD $7.01 - $18.91Availability: In stockOut of stock
This sensor is used to measure water temperature of heated or chilled water and other liquids in mechanical systems. The sensor is called an immersion type where the sensor is mounted in a brass or stainless steel thermowell which allows the probe to be removed from the pipe without draining the system and protects the probe.There are four thermistor based models, and one RTD version to provide compatibility with the majority of DDC systems.
