AO2DO Analog to Relay Output Converter
$4.73
Use these modules to convert any unused analog outputs to relay dry contact outputs.
Product Highlights:
- Converts an AO to DO dry contact relay output
- 3 relays per module.
- Plugs right into the T3 controller series.
- Use this when you need more relay outputs and have some spare analog outputs.
The AO2DO relay module converts the analog outputs of the T3 controller series into a binary dry contact output. The relay contacts are intended for pilot duty only and are rated at 0.5A/125VAC max. The module comes in 3 gang format and mate up directly on the T3 controller terminals, converting 3 AO’s into 3 dry contacts. No external wiring or jumpers are required, just position the relay module on the AO terminals and tighten the T3 output screws down.
The 3 relay module can be ganged up into longer strips to match the IO of your application to the IO of the T3 controller.
Wiring Diagram
| Weight | 0.034 kg |
|---|
You may also like…
-
Terminal Shorting Bar
$0.55Availability: In stockOut of stock
Terminal shorting bar,10 pin.Use these strips to run a common conductor through multiple terminals on any of the Temco T3 series controllers and I/O modules. The outer bar is covered in high temperature ABS. They’re available in 10 pin only version for now, you can cut them down for shorter runs or gang them up for longer runs.
Related Products
-
General Purpose Relay
$8.50 - $9.30Availability: In stockOut of stock
Featuring top-mounted terminals, this enclosed power relay has a flange-type mounting bracket for mounting in panels and ductwork. These relays are good as status points for high voltage circuits, connect the coil to the high voltage equipment and wire the dry contacts directly into the low voltage side of any of the controllers and thermostats on this site. The spade terminals make for easy troubleshooting in the field and good isolation of high & low voltage circuits.
High power switching capacity for motors and other inductive loads. The standard stocking item is the 20 amp version though we have 30 and 40 amp available as well as other variations shown in the datasheet, by request.
-
Omron G2R Relay
$3.30 - $3.50Availability: In stockOut of stock
Omron General-Purpose Relay available in SPDT and DPDT with either AC or DC coils. It comes with a pluggable base for easy din rail mounting and fast swapping of relays in the field. The narrow width allows for high density i/o in controls cabinets. The LED indicator on the low voltage coil provides handy indication of the relay status.All of the prices below are for the relay with LED option and the din rail base included.
-
Solid State Relay
$3.00 - $13.00Availability: In stockOut of stock
The LRSSR Solid State Relay brings solid state reliability to control systems in HVAC and light industrial duty applications.
-
Pluggable Power Relay
$4.00Availability: In stockOut of stock
The MY2N Relay is a general purpose plug in relay with a LED for power switching applications,built-in diode and surge suppression, test push buttons and more.MY2 = 2-Pole; MY4 = 4-Pole; N = LED; Z = Bifurcated; I = Push-to-Test.
-
Mechanical Relay with LED and base
$4.00 - $4.50Availability: In stockOut of stock
The MR Mechanical Relay is a general purpose relay suitable for both low voltage and power switching. It features a low power coil, the 12VDC version requires only 100ma to energize. The DPDT relay is rated at 10A, 120VAC. Each relay has an LED showing the low voltage status.
-
Relay Board and Transformer
$19.30 - $27.00Availability: In stockOut of stock
The relay board is designed mainly for isolation between thermostat and a fan coil or air handler, 3 relays @ 12A/125VAC, 6A/250VAC, 2 @110V 1A.
-
HVAC Contactors, UL : E246810
$8.00 - $20.00Availability: In stockOut of stock
Definite purpose contactor is a robust and low cost switching device specifically designed for the heating,ventilating and air conditioning industry.
-
HID Lighting Control Relay
$18.40Availability: In stockOut of stock
Rated for a 25A circuit at 300 and 480 VAC and has an estimated mechanical life of up to 1,000,000 uses.
Note: This product formerly was a UL recognized component but the file has lapsed, the devices cannot be found in the current UL directory
-
Mechanical Relay Board
$8.80 - $14.00Availability: In stockOut of stock
The MRB Mechanical Relay Board is a handy way to mount multiple relays in a tidy package with either 4 or 8 relay models and field selectable coil voltage of 12VDC and 24VAC. There’s a status LED for each relay and a label with writable surface where you can mark the name of each output.
