Temperature and Humidity Transducer With Bacnet and Modbus
$21.00 - $43.00
Temperature and Humidity Trasnsmitter with Bacnet/Modbus over RS485,0-10v 4-20ma output signals. Sensor is overmolded into a pluggable, waterproof connector
Product Highlights:
- Perfect for monitoring in buildings and agricultural applications.
- The Sensor is overmolded into a pluggable waterproof connector
- Easy to swap sensors for calibration or repairs.
- Highly resistant to water from spray and rain.
- Psychometric parameters such as dew point and enthalpy available over the RS485 port.
Available Options:
This temperature and humidity sensor is suitable for commercial building automation systems, airports, subway stations, hotels, museums and agricultural applications. The sensor element is directly embedded into a waterproof connector which plugs into a mating connector on the end of the cable. Swapping out the sensor for calibration and commissioning easy and without tools.
The sensor has an RS485 port and can be configured for both Modbus and Bacnet protocols. There are two transducer outputs for sending the sensor signal over 0-10V or 4-20ma signals.
used in HVAC, electrical plant,environment monitoring,dynamic environment monitoring, agricultural environmental monitoring, meteorological environmental monitoring,environmental monitoring of biological pharmacy, airport,subway stations, hotel,museum,stadium, etc.
Dimensions：
Wiring Diagram:
*12VDC works well for Modbus only systems. The 15VDC is required when you need the 10V analog outputs
| Weight | 0.1 kg |
|---|---|
| AO | With AO, Without AO |
| Mount type | 2 meter cable, Outdoor Mount, duct mount, wall mount |
Related Products
-
Duct Mount AirLab
$153.00 - $210.00Availability: In stockOut of stock
Duct Mount Air Lab Sensor with humidity,temperature,CO2,TVOC,PM2.5 and light level sensors
-
AirLab, the All-in-one Indoor Air Quality Laboratory
$64.00 - $166.00Availability: In stockOut of stock
The “Air Lab” all-in-one sensor is a total solution for measuring the indoor air quality and environment. The sensor is used widely in schools, hospitals and office buildings for demand ventilation and general air quality measurement.
There are many sensor elements in the “Air Lab” but the main attraction is the air particle sensor which can measure both the number of air particles and their density in several bin sizes. Supporting sensors include a C02 sensor, temperature, humidity, occupancy sensor, and TVOC sensor…. pretty much all the parameters you could ask for. The AirLab gives you confidence your building occupants are comfortable and breathing clean air.
The sensor integrates well with existing building automation systems or can operate stand alone as a general air quality monitor. Wireless communications over Wifi is supported using Bacnet IP or Modbus TCP protocols. The sensor also supports wired communications over RS485 twisted pair using BACnet MSTP or Modbus RTU protocols.
-
Air Quality, Hum & Temp
$34.00 – $42.00Availability: In stockOut of stock
The Node style sensor is a small form factor sensor designed for environment monitoring and control in commercial and institutional buildings. The product supports both Modbus and Bacnet on the RS485port for direct digital readings over the network on all models. Also has transducer outputs configurable as either 0-10V or 4-20ma signals.
-
Humidity and Temp Transmitters With Waterproof Connector
$55.00 - $85.00Availability: In stockOut of stock
Humidity & Temp transmitters are designed for environmental monitoring and controlling in industrial, commercial and other buildings.
-
CO2 Sensor
$72.00 - $156.50Availability: In stockOut of stock
The CO2 sensor with Humidity & Temp transmitters are designed for environmental monitoring and controlling in industrial, commercial and other buildings. These transmitters can be used for indoor C02, temperature and humidity monitoring. The modbus interface provides easy setup and integration into large systems.Supports Modbus RTU over both the Ethernet port and the RS485 port,supports Bacnet over both the Ethernet port (IP) and the RS485 port (MSTP).
-
Wall Mount Transducer
$33.50Availability: In stockOut of stock
Wall Mount Transducer , Bacnet/Modbus over RS485,0-10v 4-20ma output signal
-
PM2.5/10 Particle Counter
$133.00 - $164.50Availability: In stockOut of stock
The PM2.5/10 Particle Counter is designed for environmental monitoring in industrial, commercial and institutional buildings,which provides accurate readings of particle counts in five important sizes, 0.5μm,1.0μm,2.5μm,4μm and 10μm.
-
Outdoor Weather Station
$93.00Availability: In stockOut of stock
Outdoor weather station with humidity, temperature and
light level sensors helps with free cooling strategies and
other energy saving routines.The sensor communicates
over both Ethernet and RS485, using BOTH Bacnet and
Modbus protocols so there are many ways to integrate into
the system. -
Outdoor Air Lab
$132.00 - $193.00Availability: In stockOut of stock
Outdoor Air Lab Sensor with humidity,temperature,CO2,TVOC,WIFI and light level sensors
