Mechanical Relay with LED and base
$4.00 - $4.50
The MR Mechanical Relay is a general purpose relay suitable for both low voltage and power switching. It features a low power coil, the 12VDC version requires only 100ma to energize. The DPDT relay is rated at 10A, 120VAC. Each relay has an LED showing the low voltage status.
Product Highlights:
- Mechanical lifetime of 10^8 operations
- Switch low and high level loads from 100 mA to 7 A
- Pluggable base is panel mount or din rail
- Handy status LED shows the coil status
- UL recognized, file No.: E169380
Available Options:
Mechanical Relay with LED and base
WiringDirgram:
| Weight | 0.20 kg |
|---|---|
| Coil voltage | 120VAC, 12VDC, 220VAC, 24VAC |
You may also like…
-
Mechanical Relay Board
$8.80 - $14.00Availability: In stockOut of stock
The MRB Mechanical Relay Board is a handy way to mount multiple relays in a tidy package with either 4 or 8 relay models and field selectable coil voltage of 12VDC and 24VAC. There’s a status LED for each relay and a label with writable surface where you can mark the name of each output.
-
Relay Board and Transformer
$19.30 - $27.00Availability: In stockOut of stock
The relay board is designed mainly for isolation between thermostat and a fan coil or air handler, 3 relays @ 12A/125VAC, 6A/250VAC, 2 @110V 1A.
Related Products
-
HVAC Contactors, UL : E246810
$8.00 - $20.00Availability: In stockOut of stock
Definite purpose contactor is a robust and low cost switching device specifically designed for the heating,ventilating and air conditioning industry.
-
General Purpose Relay
$8.50 - $9.30Availability: In stockOut of stock
Featuring top-mounted terminals, this enclosed power relay has a flange-type mounting bracket for mounting in panels and ductwork. These relays are good as status points for high voltage circuits, connect the coil to the high voltage equipment and wire the dry contacts directly into the low voltage side of any of the controllers and thermostats on this site. The spade terminals make for easy troubleshooting in the field and good isolation of high & low voltage circuits.
High power switching capacity for motors and other inductive loads. The standard stocking item is the 20 amp version though we have 30 and 40 amp available as well as other variations shown in the datasheet, by request.
-
Omron G2R Relay
$3.30 - $3.50Availability: In stockOut of stock
Omron General-Purpose Relay available in SPDT and DPDT with either AC or DC coils. It comes with a pluggable base for easy din rail mounting and fast swapping of relays in the field. The narrow width allows for high density i/o in controls cabinets. The LED indicator on the low voltage coil provides handy indication of the relay status.All of the prices below are for the relay with LED option and the din rail base included.
-
AO2DO Analog to Relay Output Converter
$4.73Availability: In stockOut of stock
Use these modules to convert any unused analog outputs to relay dry contact outputs.
-
HID Lighting Control Relay
$18.40Availability: In stockOut of stock
Rated for a 25A circuit at 300 and 480 VAC and has an estimated mechanical life of up to 1,000,000 uses.
Note: This product formerly was a UL recognized component but the file has lapsed, the devices cannot be found in the current UL directory
-
Pluggable Power Relay
$4.00Availability: In stockOut of stock
The MY2N Relay is a general purpose plug in relay with a LED for power switching applications,built-in diode and surge suppression, test push buttons and more.MY2 = 2-Pole; MY4 = 4-Pole; N = LED; Z = Bifurcated; I = Push-to-Test.
-
Solid State Relay
$3.00 - $13.00Availability: In stockOut of stock
The LRSSR Solid State Relay brings solid state reliability to control systems in HVAC and light industrial duty applications.
