Thermowells
$5.50 - $8.50
These thermowells are designed for mounting temperature sensors in pipes and tanks.The thermowells are designed to handle this stress while providing good thermal contact with the fluid.They also provide isolation, if the sensor needs to be serviced the system can remain in operation without having to drain the lines. The thermowells are machined from a single piece of bar stock, there are no welds as found on competing products.
Product Highlights:
- 304 stainless steel or brass
- Construction: machined from a single piece of bar stock, no welds.
- Other lengths and materials available upon request
- Limited lifetime warranty
Available Options:
Brass and Stainless Steel Thermowells
All stainless steel sensors are made with 304 Stainless machined from a single peiece of stock, there are no welds as found on competing products. The thermowells are made to fit industry standard 6mm diameter temperature probes, you can use your own temperature probes or select from our own lineup here: https://bravocontrols.com/shop/wts-water-temperature-sensor/
The standard thread is 1/2′ NPT. We also have GPT thread and other custom models available, email us and send drawings for a quick quotation.
The ’10mm for aquastats’ thermowells are for mounting thermal expansion type probes such as the Honeywell T991. These ‘Aquastat’ type thermowells also come with a clip to hold the aquastat in place.
The flange type is used for boiler stack temperature probes and is available in stainless steel only.
Part Number Scheme:
Part Number Scheme:
Note: 3″and 8″ lengths are available as are many custom styles. Contact us with your drawings and approximate order volume for a quick quote.
| Weight | N/A |
|---|---|
| Inner Diameter | 10mm for aquastats, DDC type, 6mm probes |
| Material | Brass, Stainless steel 304 |
| Probe Length | 2 inch, 3 inch, 4 inch, 6 inch, 8 inch |
| Thread | BSP thread, NPT thread |
Related Products
-
Clip On Temperature Sensor
$3.85 - $4.00Availability: In stockOut of stock
We have designed this clip-on temperature sensor for use with refrigerant lines and copper tubing in hydronics applications. The sensor installs easily without drilling and reacts to temperature changes in seconds. Industry standard sensor elements are compatible with all major controls systems.
-
Platinum Temperature Sensor
$25.00 - $30.00Availability: In stockOut of stock
This Probe Temperature Sensor is a 1K Platinum coming standard with an 8″ length Stainless Steel Temperature Sensor.
-
1K PT Temperature Sensors
$2.80 - $9.40Availability: In stockOut of stock
The 1K Platinum temperature sensors for building automation, agricultural and light industrial duty applications.
-
High temperature probe for Floor Heating & Solar applications
$6.00 - $10.30Availability: In stockOut of stock
This temperature probe is suitable for a variety or high temperature applications such as floor heating, solar heating systems and domestic hot water heaters to name a few. The sensor element is housed in a stainless steel probe which is 6mm diameter x 50mm [2in] long. The cable is 4.5 meter long and is a high temperature material that is tough and highly durable.The probe is available with custom thermistors and Pt elements, nearly all the popular ranges are available with very small minimum order quantity.
-
Temperature Transducer with Bacnet and Modbus RS485
$19.00 - $27.00Availability: In stockOut of stock
Duct mount temperature only transducer, Bacnet/Modbus over RS485, 0-10v 4-20ma output signal
-
Duct Averaging Temperature Sensor
$39.00 - $63.00Availability: In stockOut of stock
The sensor measures temperature in stratified air such as the mixing sections of air handlers. The sensor has a standard 10k type 2 temperature-resistance curve compatible with all major control systems.
-
High temperature over molded floor heating sensor
$5.50Availability: In stockOut of stock
High temperature over molded floor heating sensor,4.5m cable length,6.0mm diameter pipe,10k Type2 thermistor.
-
Duct Temperature Sensor
$6.70 - $12.50Availability: In stockOut of stock
The duct sensor is used to measure the supply and return air temperature in HVAC system. There are several sensor elements to choose from which guarantee compatibility with all popular DDC systems. There is a precision thermistor. The probes are epoxy sealed to prevent moisture from migrating into the probe. Field calibration is not generally required. The standard probe length is 12 inch. Custom probe lengths, wire types and sensor elements are available for large OEM projects. Ask about our plastics & metal manufacturing capabilities for custom housings as well.
-
WTS5: Strap-on Water Temperature Sensor
$7.00 - $8.00Availability: In stockOut of stock
This sensor is used to measure water temperature of heated or chilled water and other liquids found in the various mechanical systems of building. The sensor is especially intended for strapping to the outside of a pipe when there is no opportunity to install a well such as in a retrofit or additions to an existing system.The strap on probe is useful in applications such as monitoring batteries, transformers, generators, and generally any place where a complete assembly can not be mounted,Ice rink slabs and soil temperature are other applications.
