Air Quality, Hum & Temp
$34.00 – $42.00
The Node style sensor is a small form factor sensor designed for environment monitoring and control in commercial and institutional buildings. The product supports both Modbus and Bacnet on the RS485port for direct digital readings over the network on all models. Also has transducer outputs configurable as either 0-10V or 4-20ma signals.
Product Highlights:
- The RS485 is hardened for overvoltage and power supply crossover amongst nodes
- Display in degrees Fahrenheit or Celsius.
- The bitmap LCD shows large & small text, symbols and other system data.
- The user can configure many display options: network activity, baud rate, protocol, etc
- Use this as a simple user interface in the zones to let the occupants adjust the setpoint up & down between the limits you choose.
- RS485 Modbus and Bacnet protocols BOTH supported, easy integration with Bacnet controllers and VAVs.
- Has 10V and 4-20ma output signals for traditional transducer based systems.
- Handy free T3000 software for configuring all parameters and calibration.
Available Options:
Wiring Diagram:
Dimension:
| Weight | 0.20 kg |
|---|---|
| LCD | with LCD, without LCD |
You may also like…
-
CO2 Sensor
$72.00 - $156.50Availability: In stockOut of stock
The CO2 sensor with Humidity & Temp transmitters are designed for environmental monitoring and controlling in industrial, commercial and other buildings. These transmitters can be used for indoor C02, temperature and humidity monitoring. The modbus interface provides easy setup and integration into large systems.Supports Modbus RTU over both the Ethernet port and the RS485 port,supports Bacnet over both the Ethernet port (IP) and the RS485 port (MSTP).
-
PM2.5/10 Particle Counter
$145.50Availability: In stockOut of stock
Mount type: duct mount, Pitot Insertion length: 150mm
Related Products
-
Duct Mount AirLab
$153.00 - $210.00Availability: In stockOut of stock
Duct Mount Air Lab Sensor with humidity,temperature,CO2,TVOC,PM2.5 and light level sensors
-
AirLab, the All-in-one Indoor Air Quality Laboratory
$64.00 - $166.00Availability: In stockOut of stock
The “Air Lab” all-in-one sensor is a total solution for measuring the indoor air quality and environment. The sensor is used widely in schools, hospitals and office buildings for demand ventilation and general air quality measurement.
There are many sensor elements in the “Air Lab” but the main attraction is the air particle sensor which can measure both the number of air particles and their density in several bin sizes. Supporting sensors include a C02 sensor, temperature, humidity, occupancy sensor, and TVOC sensor…. pretty much all the parameters you could ask for. The AirLab gives you confidence your building occupants are comfortable and breathing clean air.
The sensor integrates well with existing building automation systems or can operate stand alone as a general air quality monitor. Wireless communications over Wifi is supported using Bacnet IP or Modbus TCP protocols. The sensor also supports wired communications over RS485 twisted pair using BACnet MSTP or Modbus RTU protocols.
-
Temperature and Humidity Transducer With Bacnet and Modbus
$21.00 - $43.00Availability: In stockOut of stock
Temperature and Humidity Trasnsmitter with Bacnet/Modbus over RS485,0-10v 4-20ma output signals. Sensor is overmolded into a pluggable, waterproof connector
-
Humidity and Temp Transmitters With Waterproof Connector
$55.00 - $85.00Availability: In stockOut of stock
Humidity & Temp transmitters are designed for environmental monitoring and controlling in industrial, commercial and other buildings.
-
Outdoor Air Lab
$132.00 - $193.00Availability: In stockOut of stock
Outdoor Air Lab Sensor with humidity,temperature,CO2,TVOC,WIFI and light level sensors
-
PM2.5/10 Particle Counter
$133.00 - $164.50Availability: In stockOut of stock
The PM2.5/10 Particle Counter is designed for environmental monitoring in industrial, commercial and institutional buildings,which provides accurate readings of particle counts in five important sizes, 0.5μm,1.0μm,2.5μm,4μm and 10μm.
-
Outdoor Weather Station
$93.00Availability: In stockOut of stock
Outdoor weather station with humidity, temperature and
light level sensors helps with free cooling strategies and
other energy saving routines.The sensor communicates
over both Ethernet and RS485, using BOTH Bacnet and
Modbus protocols so there are many ways to integrate into
the system.
