BACnet Room Setpoint & Temperature Display for HVAC & Building Automation
$38.00
The BACnet Room Setpoint & Temperature Display is developed for use in industrial, commercial, and smart building environments where reliable environmental monitoring is required. Real-time temperature values and room setpoints are displayed through BACnet MS/TP or Modbus RS485 communication protocols.
Integration with building automation systems (BAS) and HVAC controllers is enabled through standardized communication support.
Product Highlights:
-
Dual communication support is provided via BACnet MS/TP and Modbus RS485, allowing flexible integration with HVAC and building management systems.
-
Output signals and RS485 communication lines are hardened against overvoltage and power supply cross-over conditions for improved operational safety.
-
Temperature values are displayed in either degrees Fahrenheit or Celsius, with configuration performed through BACnet connection.
-
A bitmap LCD display is utilized, allowing temperature readings, network connectivity status, and room setpoint information to be shown clearly.
-
Room setpoint values can be displayed, enabling the device to be used as a dedicated room temperature and setpoint display.
Related Products
-
Duct Temperature Sensor – Flange Mount
$5.00 - $8.00Availability: In stockOut of stock
This sensor is used to measure the supply and return temperature in HVAC system. The flange mount design makes it easy to install the sensor in tight quarters. There are several sensor elements to choose from which guarantee compatibility with all popular DDC systems. The probe in the photo is our standard model which is always in stock, it has a 8″ probe and a 120″ cable, and employs either a precision thermistor or platinum film sensor, so field calibration is not required. The 10ft(3m) cable is “Plenum Rated”.
-
Thermowells
$5.50 - $8.50Availability: In stockOut of stock
These thermowells are designed for mounting temperature sensors in pipes and tanks.The thermowells are designed to handle this stress while providing good thermal contact with the fluid.They also provide isolation, if the sensor needs to be serviced the system can remain in operation without having to drain the lines. The thermowells are machined from a single piece of bar stock, there are no welds as found on competing products.
-
Temperature Sensor Pipe Clip
$2.30 - $2.90Availability: In stockOut of stock
Sold in bags of 10 pcs.
-
Averaging Temperature Sensor
$27.00 - $60.00Availability: In stockOut of stock
The sensor measures temperature in stratified air such as the mixing sections of air handlers. The sensor has a standard 10k type 2 temperature-resistance curve compatible with all major control systems.
-
Outdoor Air Temperature Sensor
$7.00 - $8.00Availability: In stockOut of stock
This sensor is used to measure the outside air temperature to allow the DDC system to coordinate the mechanical systems with actual building load conditions, enabling such strategies as free cooling, optimum start/stop, and supply temperature reset. The housing is made from PVC and stainless steel fittings which shield the probe from direct sunlight. There are three thermistor based models, and one RTD version to provide compatibility with the majority of DDC systems.
-
Boiler stack temperature sensor and thermowell, 1k Pt
$23.00 - $31.00Availability: In stockOut of stock
The Boiler stack temperature sensor and thermowell are designed to monitor the temperature of boiler stacks, steam lines and other applications where the temperature is above the operating range of typical HVAC thermistor type sensors. Maximum operating temperature of 300 Deg C (570 DegF).
-
Outdoor Air Temperature Sensor, Overmolded
$5.00 - $6.00Availability: In stockOut of stock
Accurate Outdoor Air Temperature Sensor for HVAC systems with a sealed stainless steel probe, PVC radiation shield, 2m cable, and quick-response thermal grease.
-
1K PT Temperature Sensors
$2.80 - $9.40Availability: In stockOut of stock
Find all 1K Pt temperature sensors in one place, featuring multiple housing options and customizable designs to suit any application.
-
High temperature over molded floor heating sensor
$5.50Availability: In stockOut of stock
The Over Molded Floor Heating Sensor delivers precise temperature monitoring, high durability, and reliable performance for residential and industrial floors
