English 
简体中文 
BACnet Room Setpoint & Temperature Display for HVAC & Building Automation
£27.97
The BACnet Room Setpoint & Temperature Display is developed for use in industrial, commercial, and smart building environments where reliable environmental monitoring is required. Real-time temperature values and room setpoints are displayed through BACnet MS/TP or Modbus RS485 communication protocols.
Integration with building automation systems (BAS) and HVAC controllers is enabled through standardized communication support.
Product Highlights:
-
Dual communication support is provided via BACnet MS/TP and Modbus RS485, allowing flexible integration with HVAC and building management systems.
-
Output signals and RS485 communication lines are hardened against overvoltage and power supply cross-over conditions for improved operational safety.
-
Temperature values are displayed in either degrees Fahrenheit or Celsius, with configuration performed through BACnet connection.
-
A bitmap LCD display is utilized, allowing temperature readings, network connectivity status, and room setpoint information to be shown clearly.
-
Room setpoint values can be displayed, enabling the device to be used as a dedicated room temperature and setpoint display.
Related Products
-
RTS Wall and Bead Sensors
£0.74 - £2.58Availability: In stockOut of stock
The room sensors are used to provide reliable, accurate temperature readings in surface-mount room environments, Energy Management Control Systems, compatible with all the leading control systems.They feature a standard plastic ventilated enclosure.
-
Temperature Transducer with Bacnet and Modbus RS485
£13.98 - £25.76Availability: In stockOut of stock
Duct mount temperature only transducer, Bacnet/Modbus over RS485, 0-10v 4-20ma output signal
-
RTS3 Flush Mount Hidden Room Temp
£5.15 - £6.11Availability: In stockOut of stock
The room temperature sensor provide precision room temperature sensing in a discreet button form factor for all popular DDC systems.
-
Probe Temperature Sensor
£1.62 - £2.80Availability: In stockOut of stock
This Probe Temperature Sensor comes standard with a 15mm Stainless Steel Temperature Sensor. This sensor is a 10K Thermistor, with an industry standard Type 2 curve.Connected to the end of the Sensor is 2 UL2468 26/2CAWG 105°C Black Wires with tinned ends.
-
Thermowells
£4.05 - £6.26Availability: In stockOut of stock
These thermowells are designed for mounting temperature sensors in pipes and tanks.The thermowells are designed to handle this stress while providing good thermal contact with the fluid.They also provide isolation, if the sensor needs to be serviced the system can remain in operation without having to drain the lines. The thermowells are machined from a single piece of bar stock, there are no welds as found on competing products.
-
1K PT Temperature Sensors
£2.06 - £6.92Availability: In stockOut of stock
Find all 1K Pt temperature sensors in one place, featuring multiple housing options and customizable designs to suit any application.
-
Clip On Temperature Sensor
£2.83 - £4.12Availability: In stockOut of stock
We have designed this clip-on temperature sensor for use with refrigerant lines and copper tubing in hydronics applications. The sensor installs easily without drilling and reacts to temperature changes in seconds. Industry standard sensor elements are compatible with all major controls systems.
-
Tamper Proof room temperature sensor
£3.68 - £4.42Availability: In stockOut of stock
The tamper proof room temperature sensor with Torx security screws designed for use with building automation systems in commercial buildings, hospitals, museums or other facilities requiring accurate measurement of room temperature. This sensor can be directly mounted to drywall or an 11-10 electrical handy box.
-
Outdoor Air Temperature Sensor
£5.15 - £5.89Availability: In stockOut of stock
This sensor is used to measure the outside air temperature to allow the DDC system to coordinate the mechanical systems with actual building load conditions, enabling such strategies as free cooling, optimum start/stop, and supply temperature reset. The housing is made from PVC and stainless steel fittings which shield the probe from direct sunlight. There are three thermistor based models, and one RTD version to provide compatibility with the majority of DDC systems.
