BACnet Room Setpoint & Temperature Display for HVAC & Building Automation
$38.00
The BACnet Room Setpoint & Temperature Display is developed for use in industrial, commercial, and smart building environments where reliable environmental monitoring is required. Real-time temperature values and room setpoints are displayed through BACnet MS/TP or Modbus RS485 communication protocols.
Integration with building automation systems (BAS) and HVAC controllers is enabled through standardized communication support.
Product Highlights:
-
Dual communication support is provided via BACnet MS/TP and Modbus RS485, allowing flexible integration with HVAC and building management systems.
-
Output signals and RS485 communication lines are hardened against overvoltage and power supply cross-over conditions for improved operational safety.
-
Temperature values are displayed in either degrees Fahrenheit or Celsius, with configuration performed through BACnet connection.
-
A bitmap LCD display is utilized, allowing temperature readings, network connectivity status, and room setpoint information to be shown clearly.
-
Room setpoint values can be displayed, enabling the device to be used as a dedicated room temperature and setpoint display.
Related Products
-
Outdoor Air Temperature Sensor
$7.00 - $8.00Availability: In stockOut of stock
This sensor is used to measure the outside air temperature to allow the DDC system to coordinate the mechanical systems with actual building load conditions, enabling such strategies as free cooling, optimum start/stop, and supply temperature reset. The housing is made from PVC and stainless steel fittings which shield the probe from direct sunlight. There are three thermistor based models, and one RTD version to provide compatibility with the majority of DDC systems.
-
High temperature probe for Floor Heating & Solar applications
$6.00 - $10.30Availability: In stockOut of stock
This temperature probe is suitable for a variety or high temperature applications such as floor heating, solar heating systems and domestic hot water heaters to name a few. The sensor element is housed in a stainless steel probe which is 6mm diameter x 50mm [2in] long. The cable is 4.5 meter long and is a high temperature material that is tough and highly durable.The probe is available with custom thermistors and Pt elements, nearly all the popular ranges are available with very small minimum order quantity.
-
WTS Series Water Temperature Sensor
$5.00 - $13.50Availability: In stockOut of stock
This sensor is used to measure water temperature of heated or chilled water and other liquids in mechanical systems. The sensor is called an immersion type where the sensor is mounted in a brass or stainless steel thermowell which allows the probe to be removed from the pipe without draining the system and protects the probe.There are four thermistor based models, and one RTD version to provide compatibility with the majority of DDC systems.
-
Temperature Sensor Pipe Clip
$2.30 - $2.90Availability: In stockOut of stock
Sold in bags of 10 pcs.
-
1K PT Temperature Sensors
$2.80 - $9.40Availability: In stockOut of stock
Find all 1K Pt temperature sensors in one place, featuring multiple housing options and customizable designs to suit any application.
-
WTS6-I: Strap-On Insert Temperature Sensor
$5.00Availability: In stockOut of stock
The strap-on Insert sensor consists of a stainless steel sheath temperature sensor, thermal conducting compound, and an adjustable pipe bracket accessory. The stainless steel sheath temperature sensor is suitable for direct application to pipe surfaces for chilled or hot water measurement.
-
Boiler stack temperature sensor and thermowell, 1k Pt
$23.00 - $31.00Availability: In stockOut of stock
The Boiler stack temperature sensor and thermowell are designed to monitor the temperature of boiler stacks, steam lines and other applications where the temperature is above the operating range of typical HVAC thermistor type sensors. Maximum operating temperature of 300 Deg C (570 DegF).
-
Thermowells
$5.50 - $8.50Availability: In stockOut of stock
These thermowells are designed for mounting temperature sensors in pipes and tanks.The thermowells are designed to handle this stress while providing good thermal contact with the fluid.They also provide isolation, if the sensor needs to be serviced the system can remain in operation without having to drain the lines. The thermowells are machined from a single piece of bar stock, there are no welds as found on competing products.
-
WTS6-E: Strap-On External Temperature Sensor
$5.00 - $6.00Availability: In stockOut of stock
The strap-on temperature sensor is used for sensing the temperature of pipework in heating, ventilation and air conditioning systems.
