Sensors
-
High temperature over molded floor heating sensor
$5.50Availability: In stockOut of stock
High temperature over molded floor heating sensor,4.5m cable length,6.0mm diameter pipe,10k Type2 thermistor.
-
Humidity and Temp Transmitters With Waterproof Connector
$55.00 - $85.00Availability: In stockOut of stock
Humidity & Temp transmitters are designed for environmental monitoring and controlling in industrial, commercial and other buildings.
-
Non-contact liquid level sensor
$5.80Availability: In stockOut of stock
Non-contact fluid level sensor detects fluids within non metallic containers from outside the container without direct contact to the fluids. Idealy suited for lead acid batteries, fuel tanks, water storage tanks and any application where contact with the fluid or penetrations in the tank are not allowed.The sensors work on an inductance principle so they work fine with opaque material such as dark plastic, anything non metallic
-
Occupancy Light Switch
$21.00 – $22.00Availability: In stockOut of stock
The RZ021-10A-G(No Neutral Required) is an US style 5A wall mounted occupancy sensor switch which uses advanced passive infrared sensor(PIR) and MCU control.
-
Outdoor Air Lab
$132.00 - $193.00Availability: In stockOut of stock
Outdoor Air Lab Sensor with humidity,temperature,CO2,TVOC,WIFI and light level sensors
-
Outdoor Weather Station
$93.00Availability: In stockOut of stock
Outdoor weather station with humidity, temperature and
light level sensors helps with free cooling strategies and
other energy saving routines.The sensor communicates
over both Ethernet and RS485, using BOTH Bacnet and
Modbus protocols so there are many ways to integrate into
the system. -
PM2.5/10 Particle Counter
$133.00 - $164.50Availability: In stockOut of stock
The PM2.5/10 Particle Counter is designed for environmental monitoring in industrial, commercial and institutional buildings,which provides accurate readings of particle counts in five important sizes, 0.5μm,1.0μm,2.5μm,4μm and 10μm.
-
Split Core Current Sensor with 5VDC output
$9.50Availability: In stockOut of stock
These split core current sensors are cost-effective tools for monitoring single phase AC loads such as fans, pumps, and compressors. The split core design and the self powered electronics make for very simple installation. They are suitable for general monitoring and alarming of HVAC systems for conditions such as a slipped belt or an impending bearing failure.
-
Tank Level Sensor
$30.50 – $49.00Availability: In stockOut of stock
SUS 316 Stainless stell ,Standard SAE 5 hole pattern ,Output signal:0-10k ohm.
-
Temperature and Humidity Transducer With Bacnet and Modbus
$21.00 - $43.00Availability: In stockOut of stock
Temperature and Humidity Trasnsmitter with Bacnet/Modbus over RS485,0-10v 4-20ma output signals. Sensor is overmolded into a pluggable, waterproof connector
-
Temperature Transducer with Bacnet and Modbus RS485
$19.00 - $27.00Availability: In stockOut of stock
Duct mount temperature only transducer, Bacnet/Modbus over RS485, 0-10v 4-20ma output signal
-
Wall Mount Transducer
$33.50Availability: In stockOut of stock
Wall Mount Transducer , Bacnet/Modbus over RS485,0-10v 4-20ma output signal
